PFA Lined Cross – Bueno
Specifications
- Chemical Processing
- Water Treatment
- Power Generation
- Ultrapure Chemical Processing
- Use for acids, caustics, bleache, and etc.
PFA lined Pipes and PFA lined Fittings
Our metal pipes and fittings for PFA lining are either manufactured via casting or through welding seamless pipes.
The available dimensions are 1/2″ ~ 6″, the thickness of metal pipe and metal fittings for PFA lining are in accordance with schedule 40.
The default materials used are as follow, if unspecified,
- Meterial
Carbon Steel | Stainless Steel | ||
Fittings | Seamless Pipe | ASTM A234 grade WPB | ASTM A403 |
Cast Steel | ASTM A216 grade WCB | ASTM A351 | |
Pipe | Seamless Pipe | ASTM A587 or ASTM A53 grade B | ASTM A312 |
- Specifications
Fittings | ASME B16.5 CLASS 150 |
Pipe | ASME B36.10 |
Flange
The default materials used are as following, if unspecified:
- Materials
- In accordance with ASTM A105 (if the fitting i made via casting, then the flange will be cast as part of the fitting)
- In accordance with ASTM A182
- Specifications
- ASME B16.5 Class 150
Pipe | 1/2″ ~ 2″ | about 3mm PFA Lining Thickness |
2 1/2″ ~ 6″ | about 4mm PFA Lining Thickness | |
Fitting | 1/2″ ~ 4″ | about 3mm PFA Lining Thickness |
2 1/2″ ~ 6″ | about 4mm PFA Lining Thickness |
- Thickness is approximately 110µm.
- The standard application of coating contains two layers:Special requirements for coating are available upon request
- Base paint
- Surface paint
- AK3 oil removal (Heated)
- Acid neutralization
- Cleansing using RO Water
- Dry nitrogen air spraying
- Channel seal packaging
- Pressure Test: Applies max operating pressure*1.5 Air
- Tight Test: Applies mzx operating pressure*1.5
- Spark Test: 15000~20000VDC
- Water and Oil Free Test:
- Cleansed according to the standard of 1.0mg/ft (MAX)
- We will start manufacturing after the sample has been approved by our client.
- We can also provide notarization from authorities upon request.
- Coating: We pick products on random for testing with paint thickness tester.
- Appearance:
- Each piece is checked for bubbles, pinholes, or other impairing defects before the lining process. Minor blemishes are processed during the coating stage.
- Blistering and paint peeling are not allowed after coating.
Pressure Test Spark Test Coating Test
- The exhaust holes are sealed before packaging.
- Packaging
- The ends of normal pipes and flanges are sealed with plastic plates to prevent damage to the PFA liner.
- For water and oil free lined PFA lined pipes and PFA lined lined fittings, the two ends are sealed with adhesive-free tapes (alternatively, the flanges can be sealed by plastic bags), and covered with end caps to prevent damage to the PFA liner. Before storage and shipping, the products are labeled, numbered, and sorted according to order number, charge number, and content. After being properly ordered, they are collectively stored or shipped. The products are packaged with wooden crates when shipped; in addition, the interior of the crate contains a large plastic seal to prevent water and vapor permeation.
Material List
Parts | Carbon Steel | Stainless Steel |
Flange | ASTM A105 or A216 WCB | ASTM A182 or A351 |
Steel Steel | ASTM A234 grade WPB or A216 WCB | ASTM A403 or A351 |
Steel bend | according to SCH 40 | |
Standard | four fixed flanges | |
Liner | PFA ( Fluoropolymer ) Lining |
Dimensions
Unit:mm | |||||||
NPS | L | ANSI B16.5 Class 150 | |||||
INCH | ØA | ØK | ØD | nxØh | T | PFA | |
1/2″ | 70 | 32 | 60.5 | 89 | 4×16 | 14.2 | 3.0 |
3/4″ | 80 | 40 | 69.8 | 98.6 | 4×16 | 14.2 | 3.0 |
1″ | 89 | 48 | 79.2 | 108 | 4×16 | 14.2 | 3.0 |
1-1/2″ | 102 | 69 | 98.4 | 127 | 4×16 | 17.3 | 3.0 |
2″ | 114 | 87.9 | 120.7 | 152.4 | 4×19 | 18.8 | 3.0 |
2-1/2″ | 127 | 100.6 | 139.7 | 177.8 | 4×19 | 21.7 | 4.1 |
3″ | 140 | 127 | 152.4 | 190.5 | 4×19 | 23.2 | 4.1 |
4″ | 165 | 153.2 | 190.5 | 228.6 | 8×19 | 28.0 | 4.1 |
6″ | 203 | 212.7 | 241 | 279 | 8×22 | 29.4 | 4.1 |