Check Valve Stainless Steel PFA Lined – PC11 CLASS 150LB – Bueno

Check Valve Stainless Steel PFA Lined – PC11 CLASS 150LB – Bueno

Specifications

Size Range 1/2″~4″

Pressure grade CLASS 150 LB

Maximum operating pressure

  • FLOW : 275 psi (19 bar)
  • CHECK : 150 psi (10 bar)

Valve body design ASME B16.34

Face to face ISO 5752

Operating temperature -30°C ~+100°C

Universal Installation Orientation.

Low Pressure Applications and No Back

Pressure to seat

Lining thickness is at least 3mm

Testing standard ASME B16.34

Material List

 

Designation Material
BODY A351-CF8+PFA LIned
CAP A351-CF8+PFA LIned
SLEEVE PTFE
DISC PTFE
SPRING SUS304*WPA+PFA
WASHER PTFE
Dimensions

 

SIZE ØA L D
in DN 150LB
1/2″ 15 15 130 89
3/4″ 20 20 150 98.6
1″ 25 25 160 108
1-1/2″ 40 38.5 200 127
2″ 50 51 230 152
2-1/2″ 65 65 290 178
3″ 80 76 310 190.5
4″ 100 102 350 228.6

UNIT: mm

Construction Drawing

Produits similaires

Triple Offset Metal Seated Butterfly Valve – HIPPO

Triple Offset Metal Seated Butterfly Valve – HIPPO

Specifications

Testing?API 598, ISO 5208
Pressure-Temperature Rating?API 609 / ASME B16.34
Valve Design?ASME B16.34, MSS-SP-68
Anti-Blow-Out Stem?API 609
Facc-to-Face?API 609, MSS-SP-68, ISO 5752
Fire Safe?API 607
Low Fugitive Emission Gland Packing System
??DIN3780, MSS-SP-143
Marking?MSS-SP-25, API 609
Top Mounting?ISO 5211
Suitable Flange?ANSI 150lb, 300lb,
DIN:PN10, 16, 20, 25, 40, 50
JIS: 10K, 16K, 20K, 30K, 40K

Design Features

Gland Flange : A fully adjustable two-piece gland flange to make sure an even packing load over 360 °

Anti-Blow-Out system : Protecting stem blow-out caused by pressure.

Gland Bush : Standing alone with Gland Flange, preventing uneven down-pressure on gland packing.

Gland Packing : Multiple materials are available to use. Performance is compliance with API 598’s testing pressure.

Valve Seat : Bi-direction zero leakage design. Use Solid or Laminated Metal.

Taper Pin : Tangentially positioned half in disc and half in stem to eliminate potential of failure.

Retainer Ring : A screw-fixed design retainer ring. This deign can be used in the end of pipe system. Surface roughness is 125-200AARH.

Thrust Ring : Use 316 as material.

Position in bottom of stem for preventing incorrect stem shift.

Bottom Cover : Use rigid 316 as material to prevent abnormal leakage.

Bottom Gasket : Uses Sprial wound Gasket as material.

Valve Stem : Use stainless-steel with hard chrome plated. A strong and rigid one-piece-stem design which largely increase overall strength. Stem and corresponding components size are all compliance with ISO 5211. Stem material and disc position is marked on the top of stem.

Bush : Uses Nitrided 316 stem bush. Has excellent working temperature, strength rating, and low friction factor.

Bush Protector : Using graphite. Resisting fluid debris into the valve to ensure smooth operations.

Valve Disc : Use stainless-steel with ENP or Stellite 21 treatment. An anti-corrosion, streamlined design with great enhancement on lowering noise and turbulence.

Valve Body : Compliance with API 609 & ASME B16.34. In order to make valve context intuitive and straightforward, an additional name plate is designed to mark detail information

Seat Gasket : Uses Sprial wound Gasket to keep zero-leakage under any kind of pressure or temperature.

Thrust Plate : Use Nitrided stainless-steel 316 to reduce operating friction between stem and bottom cover.

Produits similaires

Actuators – Control Accessories & Instrumentations

Actuators – Control Accessories & Instrumentations

Actuators

Electrical actuators (Bernard Controls), other brands on request

  1. Smart electonic control or/and mechanical
  2. Atex Protection
  3. For quaren turn, multiturn, linar valves
  4. Fail safe

 

 

 

Pneumatic, hydraulic, gas over oil actuators

  1. Single & double acting ( spring return, fail safe)
  2. Rack & Pignons
  3. Cylindre Pistons, Scotch and yoke …
  4. Manual overide
Control Accessories

  1. Position control ATEX (inductive or mechanical contact)
  2. Solenoid valves ATEX ( 3/2, 5/2)
  3. Positioner ( électro- pneumatic)
  4. Integrated control (Soleonid, positioner, contact)
  5. Filter/ ressure reducer
Instrumentation

 

  1. Soupape d’expansion thermique
  2. Soupape de sécurité, Asme, API

Butterfly Valves PFA Lined – Ghibson

Butterfly Valves PFA Lined – Ghibson

Specifications

PTFE body seat has a thickness varying from 2,5 to 3 mm depending on the position, even in the shaft area.

Discs are available in stainless steel (AISI316, HASTELLOY®, DUPLEX®, SUPERDUPLEX®, INCONEL®, etc.), and in stainless steel coated with HALAR® or PTFE.

Standard shafts are in AISI316 stainless steel (Monel® or other materials on request).

Two silicon half rings increase and ensure elasticity up to highest working temperatures.

Belleville washers ensure the sealing in the upper plane of the disc.

Furthermore, a double packing consisting in a FEP coated FKM O Ring and a PTFE C-ring will avoid any leakage along the shaft.

In the TT-valve series the PTFE lining covers the shaft beyond the FEP coated FKM O Ring so that the fluid never contacts the metal core of the disc.

Design Features

BVTT – Wafer                                                             BLTT – Lug

DN 50 – 500 • 2” – 20”                                               DN 50 – 500 • 2” – 20”

 

Max working pressure:

BVTT/BLTT DN 50÷400:                 10 Bar

Flange: PN 10-16-A150

BVTT/BLTT DN 500: 6 Bar

Flange: PN 10-16-A150

To be used for vacuum (not with PTFE disc)

 

Design:

EN 593 ~ EN 736 ~ EN 12516 ~ EN 1092

ISO 5211 ~ DIN 3337 ~ API 609

PED 97/23/EC (cat III) Mod H

 

Face to face:

DIN EN 558-1 Series 20 ~ ISO 5752 Series 20

BS-5155 Series 4 ~ MSS-SP67

API 609 cat. A ~ NFE 29305-1

 

Testing:

EN 12266-1 Rate A ~ ISO 5208 Rate A

DIN 3230 ~ API 598

Tag:

EN 19 ~ MSS SP-25


 

Product Range

PFA Lined Pipe – Bueno

PFA Lined Pipe – Bueno

Specifications
    • Chemical Processing
    • Water Treatment
    • Power Generation
    • Ultrapure Chemical Processing
    • Use for acids, caustics, bleache, and etc.
    Product Description & Design

    PFA lined Pipes and PFA lined Fittings
    Our metal pipes and fittings for PFA lining are either manufactured via casting or through welding seamless pipes.
    The available dimensions are 1/2″ ~ 6″, the thickness of metal pipe and metal fittings for PFA lining are in accordance with schedule 40.
    The default materials used are as follow, if unspecified,

    • Meterial
    Carbon Steel Stainless Steel
    Fittings Seamless Pipe ASTM A234 grade WPB ASTM A403
    Cast Steel ASTM A216 grade WCB ASTM A351
    Pipe Seamless Pipe ASTM A587 or ASTM A53 grade B ASTM A312
    • Specifications
    Fittings ASME B16.5 CLASS 150
    Pipe ASME B36.10

     

    Flange
    The default materials used are as following, if unspecified:

    • Materials
      • In accordance with ASTM A105 (if the fitting i made via casting, then the flange will be cast as part of the fitting)
      • In accordance with ASTM A182
    • Specifications
      • ASME B16.5 Class 150
    PFA Lining Thickness
    PFA  ( Perfluoroalkoxy)
    Pipe 1/2″ ~ 2″ about 3mm PFA Lining Thickness
    2 1/2″ ~ 6″ about 4mm PFA Lining Thickness
    Fitting 1/2″ ~ 4″ about 3mm PFA Lining Thickness
    2 1/2″ ~ 6″ about 4mm PFA Lining Thickness

     

    Welding
    In accordance with ASME Boiler and meets the requirements of Pressure Vessel Code, clause nine.
    Exhaust Hole
    Each PFA lined pipe and PFA lined fittings has at least one 2mm diameter exhaust hole in order to release the gast trapped between the liner and the metal part. If the pipe exceeds 500mm in length, it will contain at least two exhaust holes. Reducing flanges don’t have exhaust hole.
    Coating
    • Thickness is approximately 110µm.
    • The standard application of coating contains two layers:Special requirements for coating are available upon request
      • Base paint
      • Surface paint
    Procedures of Oil and Water-Free treatment
    1. AK3 oil removal (Heated)
    2. Acid neutralization
    3. Cleansing using RO Water
    4. Dry nitrogen air spraying
    5. Channel seal packaging
    Test
    We uphold a full inspection policy that requires all finished PFA lined pipe and PFA lined fitting to pass the following test before shipment. Other methods of testing can be done upon customer demand.
    • Pressure Test: Applies max operating pressure*1.5 Air
    • Tight Test: Applies mzx operating pressure*1.5
    • Spark Test: 15000~20000VDC
    • Water and Oil Free Test:
      • Cleansed according to the standard of 1.0mg/ft (MAX)
      • We will start manufacturing after the sample has been approved by our client.
      • We can also provide notarization from authorities upon request.
    • Coating: We pick products on random for testing with paint thickness tester.
    • Appearance:
      • Each piece is checked for bubbles, pinholes, or other impairing defects before the lining process. Minor blemishes are processed during the coating stage.
      • Blistering and paint peeling are not allowed after coating.

    PFA lined Pipe and PFA lined Fitting    PFA lining Pipe and PFA lining Fitting  PFA lined Pipes and PFA lined Fittings
    Pressure Test                                      Spark Test                                          Coating Test

    Packing and Storage
    • The exhaust holes are sealed before packaging.
    • Packaging
      • The ends of normal pipes and flanges are sealed with plastic plates to prevent damage to the PFA liner.
      • For water and oil free lined PFA lined pipes and PFA lined lined fittings, the two ends are sealed with adhesive-free tapes (alternatively, the flanges can be sealed by plastic bags), and covered with end caps to prevent damage to the PFA liner. Before storage and shipping, the products are labeled, numbered, and sorted according to order number, charge number, and content. After being properly ordered, they are collectively stored or shipped. The products are packaged with wooden crates when shipped; in addition, the interior of the crate contains a large plastic seal to prevent water and vapor permeation.
Material List
Parts Carbon Steel Stainless Steel
Flange ASTM A105 ASTM A182
Steel Frame ASTM A587 or ASTM A53 grade B ASTM A312
Steel bend according to SCH 40
Steel bend one fixed flange, one loose flange
Liner PFA ( Fluoropolymer ) Lining

 

Dimensions
NPS L/min. L/max. ANSI B16.5 Class 150
INCH φA φK φD nxφh T f/PFA
1/2” 100 6000  32 60.5 89 4×16 14.2 3.0
3/4” 100 6000  40 69.9 98.6 4×16 14.2 3.0
1” 100 6000  48 78.2 108 4×16 14.2 3.0
1 1/2” 100 6000  69 98.6 127 4×16 17.3 3.0
2” 100 6000  87.9 120.7 152.4 4×19 18.8 3.0
2 1/2” 100 6000  100.6 139.7 77.8 4×19 21.7 4.1
3” 100 6000  127 152.4 190.5 4×19 23.2 4.1
4” 100 6000  153.2 190.5 228.6 4×19 28.0 4.1
6” 100 6000 212.7 241 279 8×22 29.4 4.1

UNIT: mm

 

Construction Drawing

Produits similaires

PFA Lined Elbow 45° – Bueno

PFA Lined Elbow 45° – Bueno

Specifications
    • Chemical Processing
    • Water Treatment
    • Power Generation
    • Ultrapure Chemical Processing
    • Use for acids, caustics, bleache, and etc.
    Product Description & Design

    PFA lined Pipes and PFA lined Fittings
    Our metal pipes and fittings for PFA lining are either manufactured via casting or through welding seamless pipes.
    The available dimensions are 1/2″ ~ 6″, the thickness of metal pipe and metal fittings for PFA lining are in accordance with schedule 40.
    The default materials used are as follow, if unspecified,

    • Meterial
    Carbon Steel Stainless Steel
    Fittings Seamless Pipe ASTM A234 grade WPB ASTM A403
    Cast Steel ASTM A216 grade WCB ASTM A351
    Pipe Seamless Pipe ASTM A587 or ASTM A53 grade B ASTM A312
    • Specifications
    Fittings ASME B16.5 CLASS 150
    Pipe ASME B36.10

     

    Flange
    The default materials used are as following, if unspecified:

    • Materials
      • In accordance with ASTM A105 (if the fitting i made via casting, then the flange will be cast as part of the fitting)
      • In accordance with ASTM A182
    • Specifications
      • ASME B16.5 Class 150
    PFA Lining Thickness
    PFA  ( Perfluoroalkoxy)
    Pipe 1/2″ ~ 2″ about 3mm PFA Lining Thickness
    2 1/2″ ~ 6″ about 4mm PFA Lining Thickness
    Fitting 1/2″ ~ 4″ about 3mm PFA Lining Thickness
    2 1/2″ ~ 6″ about 4mm PFA Lining Thickness

     

    Welding
    In accordance with ASME Boiler and meets the requirements of Pressure Vessel Code, clause nine.
    Exhaust Hole
    Each PFA lined pipe and PFA lined fittings has at least one 2mm diameter exhaust hole in order to release the gast trapped between the liner and the metal part. If the pipe exceeds 500mm in length, it will contain at least two exhaust holes. Reducing flanges don’t have exhaust hole.
    Coating
    • Thickness is approximately 110µm.
    • The standard application of coating contains two layers:Special requirements for coating are available upon request
      • Base paint
      • Surface paint
    Procedures of Oil and Water-Free treatment
    1. AK3 oil removal (Heated)
    2. Acid neutralization
    3. Cleansing using RO Water
    4. Dry nitrogen air spraying
    5. Channel seal packaging
    Test
    We uphold a full inspection policy that requires all finished PFA lined pipe and PFA lined fitting to pass the following test before shipment. Other methods of testing can be done upon customer demand.
    • Pressure Test: Applies max operating pressure*1.5 Air
    • Tight Test: Applies mzx operating pressure*1.5
    • Spark Test: 15000~20000VDC
    • Water and Oil Free Test:
      • Cleansed according to the standard of 1.0mg/ft (MAX)
      • We will start manufacturing after the sample has been approved by our client.
      • We can also provide notarization from authorities upon request.
    • Coating: We pick products on random for testing with paint thickness tester.
    • Appearance:
      • Each piece is checked for bubbles, pinholes, or other impairing defects before the lining process. Minor blemishes are processed during the coating stage.
      • Blistering and paint peeling are not allowed after coating.

    PFA lined Pipe and PFA lined Fitting    PFA lining Pipe and PFA lining Fitting  PFA lined Pipes and PFA lined Fittings
    Pressure Test                                      Spark Test                                          Coating Test

    Packing and Storage
    • The exhaust holes are sealed before packaging.
    • Packaging
      • The ends of normal pipes and flanges are sealed with plastic plates to prevent damage to the PFA liner.
      • For water and oil free lined PFA lined pipes and PFA lined lined fittings, the two ends are sealed with adhesive-free tapes (alternatively, the flanges can be sealed by plastic bags), and covered with end caps to prevent damage to the PFA liner. Before storage and shipping, the products are labeled, numbered, and sorted according to order number, charge number, and content. After being properly ordered, they are collectively stored or shipped. The products are packaged with wooden crates when shipped; in addition, the interior of the crate contains a large plastic seal to prevent water and vapor permeation.
Material List
Parts Carbon Steel Stainless Steel
Flange ASTM A105 or  ASTM A216 WCB ASTM A182 or ASTM A351
Steel Frame ASTM A234 grade WPB or ASTM A216 WCB ASTM A403 or ASTM A351
Steel bend according to SCH 40
Standard two fixed flanges
Liner PFA ( Fluoropolymer ) Lining

 

Dimensions
 NPS  L  ANSI B16.5 CLASS 150
 INCH  ΦA  ΦK  ΦD  nxΦh  T  f/PFA
 1/2”  45  32  60.5  89  4X16  14.2  3.0
 3/4”  45  40  69.9  98.6  4X16  14.2  3.0
 1”  44  48  79.2  108  4X16  14.2  3.0
 1 1/2”  57  69  98.6  127  4X16  17.3  3.0
 2”  64  87.9  120.7  152.4  4X19  18.8  3.0
 2 1/2”  76  100.6  139.7  177.8  4X19  21.7  4.1
 3”  76  127  152.4  190.5  4X19  23.2  4.1
 4”  102  153.2  190.5  228.6  8X19  28  4.1
 6”  127  212.7  241  279  8X22  29.4  4.1

UNIT : mm

 

Construction Drawing

Produits similaires